Building up to the big reveal...
The house has been in chaos since I arrived with my bags, suitcases, boxes and utter mess that I seemed to bring back with me. Add into this mix decorating a room, with all the stuff from that room, my stuff and me being crammed into another room as part of the process. We are nearing completion on room #1 and pictures will follow in due course you lucky people.
So before all this chaos has been calmed I thought the best thing to do would be to make some more mess. So, I decided to start on the next major projet which was to redecorate Mattys old room which is now considered Sarah's room. It gets more complicated when you are walking around Ikea with Mum saying I like that [thing] it would go really well in the [room]. This conversation continues for five minutes until you are not only talking about completely different rooms, but actually rooms in completely different houses... hah! Very confusion!
Mum has also been clearing her office of all surplus paper and stuff. We managed to fill two sacks of paper recycling this week. The poor shredder has also been receiving a battering to foil all those nasty identity theifs who are lurking around our bins at night with the hope of finding one shred of paper with any personal information on them whatsoever. If you are reading this Mr Identity Thief.... i wouldnt bother wasting your time cos it aint gonna happen!
In other news, Matty this has arrived for you and will be packed in my suitcase for our trip. 
2 comments:
wooohooo, my fuel pump. Can you check that they sent the right one, should be auf 214... i don't trust these people. ...and.... can you measure the inlet and outlet stubs (diameter, not length) too ... :-)
The invoice says AUF214 but nowhere on the actual pump is that shown.
On the face plate of the pump by the inlet and outlets i can see AUB613, but im not sure if that means its the right or wrong one.
Both inlet and outlet stubs are 7mm total diam with an inner diam of 5mm.
Post a Comment